36 mm Drill Size

metric drill

36 mm 1.4173 in 36.00 mm

A 36 mm drill measures 1.4173 in. It taps 2 threads in this chart.

What a 36 mm drill taps

Every thread this drill cuts between 50% and 85% of thread, deepest first. Outside that band it is the wrong drill for the job, so nothing below that line is listed.

Threads a 36 mm drill taps, with the percent of thread each one gets and the published chart drill for comparison.
Thread	% thread	Chart drill	Chart %
1-1/2-12	76.4%	1-27/64″	72.1%
M39 x 4	57.7%	35 mm	77.0%

Other jobs for a 36 mm

Hard-material tap drill: The size to use in stainless or tool steel for M39 x 4, where it leaves a shallower thread than the standard drill and cuts tapping torque.

Drills either side

1-25/64″ 1.3906 in · 35.32 mm Next size down
1-27/64″ 1.4219 in · 36.12 mm Next size up

All drill sizes → · Open this drill in the calculator →

36 mm drill: common questions

What size is a 36 mm drill?

1.4173 inches, which is 36.00 mm. It is a metric drill.

What can I tap with a 36 mm drill?

2 threads: 1-1/2-12 at 76.4%, M39 x 4 at 57.7%.

What drill is next to a 36 mm?

Down: 1-25/64 in at 1.3906 in. Up: 1-27/64 in at 1.4219 in.