Tap Drill Size Chart

9.2 mm Drill Size

metric drill

9.2 mm 0.3622 in 9.20 mm

A 9.2 mm drill measures 0.3622 in. It taps 3 threads in this chart.

What a 9.2 mm drill taps

Every thread this drill cuts between 50% and 85% of thread, deepest first. Outside that band it is the wrong drill for the job, so nothing below that line is listed.

Threads a 9.2 mm drill taps, with the percent of thread each one gets and the published chart drill for comparison.
Thread % thread Chart drill Chart %
M10 x 0.75 82.1% 9.3 mm 71.9%
7/16-14 81.2% U 74.9%
M10 x 1 61.6% 9 mm 77.0%

Other jobs for a 9.2 mm

Hard-material tap drill
The size to use in stainless or tool steel for M10 x 1, where it leaves a shallower thread than the standard drill and cuts tapping torque.

Drills either side

All drill sizes → · Open this drill in the calculator →

9.2 mm drill: common questions

What size is a 9.2 mm drill?
0.3622 inches, which is 9.20 mm. It is a metric drill.
What can I tap with a 9.2 mm drill?
3 threads: M10 x 0.75 at 82.1%, 7/16-14 at 81.2%, M10 x 1 at 61.6%.
What drill is next to a 9.2 mm?
Down: 23/64 in at 0.3594 in. Up: 9.3 mm at 0.3661 in.