9.3 mm Drill Size

metric drill

9.3 mm 0.3661 in 9.30 mm

A 9.3 mm drill is the standard tap drill for M10 x 0.75.

What a 9.3 mm drill taps

Every thread this drill cuts between 50% and 85% of thread, deepest first. Outside that band it is the wrong drill for the job, so nothing below that line is listed.

Threads a 9.3 mm drill taps, with the percent of thread each one gets and the published chart drill for comparison.
Thread	% thread	Chart drill	Chart %
7/16-14	76.9%	U	74.9%
M10 x 0.75 chart drill	71.9%	9.3 mm	71.9%
M10 x 1	53.9%	9 mm	77.0%

Other jobs for a 9.3 mm

Form-tap hole: The published roll-tap hole for M10 x 1.5. A form tap displaces metal instead of cutting it, so it needs this larger hole.

Drills either side

All drill sizes → · Open this drill in the calculator →

9.3 mm drill: common questions

What size is a 9.3 mm drill?

0.3661 inches, which is 9.30 mm. It is a metric drill.

What can I tap with a 9.3 mm drill?

3 threads: 7/16-14 at 76.9%, M10 x 0.75 at 71.9%, M10 x 1 at 53.9%.

Is a 9.3 mm drill the standard tap drill for anything?

Yes, for M10 x 0.75 (71.9% thread). That is the size published tap and drill charts give.

What drill is next to a 9.3 mm?

Down: 9.2 mm at 0.3622 in. Up: U at 0.368 in.